EFE Rail E82005 OO Gauge SR Bullied Booster 20001 BR Blue

The Southern Railway was an early adopter of electric traction, quickly building a network of electrified lines and creating what was once the world#s largest electrified railway system. Electric Multiple Units were principally employed on these electric routes, but as the system expanded beyond the suburbs, the Southern's Chief Mechanical Engineer Oliver Bulleid and Chief Electric Engineer Alfred Raworth recognised the potential of electricity to power locomotives that could haul coaching stock and freight too. And so, the pair designed a Co-Co electric locomotive, the first of which was built in 1941. The design of the two cabs shared many features with EMUs of the time, whilst between them, within the body of the locomotive, could be found the electrical equipment.

With a much shorter distance between their front and rear pickups, when compared to a multiple unit, locomotives could be prone to losing electrical pickup if any gap in the conductor rail was greater than the distance between the pickups - known as 'gapping'. To overcome this, two motor generator sets and flywheels were included in the design with the power collected from the third rail used to drive the generators, fitted with heavy flywheels, which then powered the motors. Thus, power to the traction motors would be maintained by the motor generator sets being driven by the flywheel when the traction supply was briefly lost in the event of 'gapping'. These motor-generator-flywheel sets were referred to as 'Boosters', giving the type its nickname. Pantographs were also fitted for overhead pickup in sidings and depots where a conductor rail presented danger to staff.

The first locomotive, No. CC1 (renumbered to No. 20001 by BR) was outshopped by Ashford Works in 1941. Carrying Photographic Grey livery, three horizontal stripes were applied to the bodysides, culminating at the cab end in what we would now call speed whiskers. Being wartime, the cab windows had metal plates added to the top and bottom to reduce the aperture. Next, No. CC1 carried Malachite Green livery with Sunshine Southern lettering and yellow lines at solebar and cantrail level. The second locomotive, No. CC2 (BR No. 20002) was built in 1945 and emerged in the same livery. Both were used on express passenger and goods trains.

Passing into BR ownership in 1948, the pair continued in use, with various modifications over the years. A third locomotive, No. 20003 was completed by BR in 1948 however its appearance differed somewhat, having a cab design based on that of more contemporary EMUs with a slab front. Whilst successful locomotives, being a class of three non-standard types, the 'Boosters' eventually succumbed to withdrawal with No. 20003 the first to go in October 1968. No.20002 was withdrawn in December 1968 and No.20001 survived until January 1969, having been decorated earlier in BR Blue livery with full yellow ends. The trio were classified as Class 70 under the Total Operations Processing System (TOPS), however their withdrawal by 1969, and subsequent scrapping, prevented any of the locomotives from carrying TOPS numbers.

- Equipped with a 21 Pin DCC Decoder Socket
- Length 225mm

Detail Variations Specific To This Model
- Standard Cab Windows
- Vertical Handrail alongside the Left Hand Cab Window
- Revised Windscreen Wipers
- Roof-mounted Horns
- Roller Blind Route Indicator
- Single-tread Steps between Bogies
- Roller Bearing Axle Boxes
- Two Sandboxes per Bogie
- Square Shoe Beam Flash Guards
- Standpipe Vacuum Pipes